Tag Archives: uv cure

High Clarity UV Adhesives for Garden Art

Garden art is best described as turning miscellaneous pieces of glass, ceramic, wine bottles, pressed glass, sea glass and metal into an indoor or outdoor sculpture. The real challenge is in building the sculpture with different pieces that were never designed to go together in the first place.

Some important things to keep in mind while planning and working on your garden art project:

1.  Key design considerations for long lasting sculptures:

  • Avoid tangent and point contact between pieces – make sure there is flat to flat contact between components – the more the better.
  • A roughened surface (abraded or sand blasted) will improve performance of the adhesive bond.
  • Avoid cantilevered designs that put the adhesive joint in cleavage or peel.
  • If the design is outdoors, the glue joints chosen should shed water rather than hold water.

2.  Pay attention to construction techniques:

          • As we mentioned in our most recent blog entry, “Surface Concerns: Anything But Superficial” – cleanliness is really important. Be sure to clean all components with isopropyl alcohol and make sure the surface is dry before applying adhesive.
  • Be sure you don’t move components prior to hard fixturing as this will compromise performance.
  • Wherever possible, apply adhesive in a horizontal position and fixture in the same position.
  • Flatten rounded edges that will receive adhesive – use a belt sander or silicon carbide paper – and always clean after sanding. Dremel® type tools can also be used to roughen surfaces.
  • Attention to detail is important – don’t skip steps in part preparation and fixturing.

3.  Understand how to ensure the fixture is cured:

  • Establish fixture time using the materials you plan to use to build the structure.
  • To determine how long it takes to cure, use the “Rule of 5”: once there is fixture between the pieces, continue to hold the light source on the area for 5 times the amount of time it took you to achieve that initial fixture. Remember, longer is better and won’t affect performance as long as you aren’t using a high powered lamp.
  • For colored glass, make sure the glass doesn’t block the light energy needed to cure the adhesive.
  • Take the time to frequently make sure your light source is properly functioning – establish a benchmark fixture test and use it on a regular basis to validate cure times.

4.  Important safety considerations to remember:

  • Most adhesives are mild skin sensitizers, so be sure to throw away used gloves.
  • Adhesives have an odor, so work in a well-ventilated area.
  • Never look at a UV light source without wearing protective eyewear.

Please feel free to contact us at any point if you have questions about handling these materials and remember:  the only stupid question is the one that isn’t asked.

Good Gluing!

Advertisements

Leave a comment

Filed under Tutorials

Catching Some Rays: Outdoor assembly and UV-curing with natural sunlight

Summer’s here and the time is right for gluing in the street. Or in the yard, anyway.

It’s the ideal time of year to build or repair glasswork fixtures such as patio lampshades or barware, and decorations such as mosaics, sun catchers, and fountains. As discussed in the previous post, two UV light cured products available from CLK Associates are well-suited for projects that end up out of doors through the four seasons.

A UV lamp is your best option, but if you don’t have one, you can also use natural sunlight to cure these products. Sunlight’s lower UV intensity means curing takes longer – sometimes several hours – but it can yield a bond just as strong and durable as one formed with a UV lamp.

If curing with natural sunlight, take care that all parts are immobilized to ensure that glued parts don’t slide or shift as the glue cures. Creative use of clamps, clothespins, and elastic bands can help with this. Some of this fixturing material may prevent light from getting to the total glue line – once you have a hard fixture remove the fixture aids and let the sun finish its work.

NOTE:  these adhesives will also bond well to wood and paper so if the fixturing materials come into contact with adhesive that extrudes from the glue joint it may want to stay attached to the glass.

Once the adhesive has set you can clean up any adhesive that is outside the joint with a razor blade and isopropyl alcohol as sunlight isn’t strong enough to fully cure the surface of the adhesive fillet outside the joint.

Best practice is to apply and build your work away from direct sunlight. If you have to work in direct sunlight, install an umbrella to shade the work area until you are ready to let the sun begin curing the product.

For repair or prototyping a concept the sun is fine: However, if you plan on building items for resale, it is recommended that you make the investment in a black light that will allow you to better control the curing process.

Good Gluing!

Leave a comment

Filed under Tutorials

Welcome to our new CLK Associates Blog.

We are excited to share information, tips, ideas and everything meaningful to help you with bonding your glass, metal, crystal or wood project.

If you are an Artist looking for a way to attach glass, or a Craftsman in need of a UV Curing adhesive, or even a Homeowner looking for an adhesive to fix a valuable piece, we would love to help.

As this Blog grows, we’ll be adding Tutorials,  FAQ’s, Pictures of Artists Creations as well as your Ideas.  Thanks for coming by, stop back often and check out our site at www.clk-llc.com

Leave a comment

Filed under Welcome

Assembly techniques for consideration when using adhesives.

Regardless of the adhesive chosen there are some basic steps in project design, part preparation, and adhesive application and cure to insure a long lived project.

Overview – Adhesives are another tool available to help make the assembly of materials easier.  However, to get the maximum benefit from their use you must play to their strengths.  For the following discussion the adhesive is assumed to be OK.
The adhesive is only as good as what it is stuck to.   Surface cleanliness is a must.

Make sure you have a simple test to insure the adhesive is working properly

Make sure the components are the same each time – substituting materials or a change in supplier needs to be re-evaluated – do not assume they are the same.

Hand fixturing induces lots of variability in the ultimate performance – simple fixturing and clamping will eliminate a major variation in performance.

Once the adhesive has been applied, the parts assembled and fixtured don’t handle or try to readjust things – most adhesives, regardless of how quick they set (with the exception of uv cure materials) continue to develop strength for several days – this includes super glues, 5 minute epoxies, etc.  Make sure you do not compromise performance if you need to handle parts soon after assembly.

Find out more at our site, www.clk-llc.com.

Leave a comment

Filed under Tutorials